A-516/A-516M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
A-517/A-517M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
A-518/A-518M-99(2003) Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
A-519-03 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
A-521-03 Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
A-522/A-522M-01 Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
A-523-96(2001) Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
A-524-96(2001) Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
A-529/A-529M-03 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
A-530/A-530M-03 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
A-531/A-531M-91(2001) Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
A-532/A-532M-93a(2003) Standard Specification for Abrasion-Resistant Cast Irons
A-533/A-533M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A-534-01 Standard Specification for Carburizing Steels for Anti-Friction Bearings
A-536-84(1999)e1 Standard Specification for Ductile Iron Castings
A-537/A-537M-95(2000) Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
A-539-99 Standard Specification for Electric-Resistance-Welded Coiled Steel Tubing for Gas and Fuel Oil Lines
A-540/A-540M-00 Standard Specification for Alloy-Steel Bolting Materials for Special Applications
A-541/A-541M-95(1999) Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
A-542/A-542M-99e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
A-543/A-543M-93(1999) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
A-550-78(2000) Standard Specification for Ferrocolumbium
A-551-94(1999) Standard Specification for Steel Tires
A-553/A-553M-95(2000) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel
A-554-03 Standard Specification for Welded Stainless Steel Mechanical Tubing
A-555/A-555M-97(2002) Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
A-556/A-556M-96(2001) Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
A-560/A-560M-93(1998) Standard Specification for Castings, Chromium-Nickel Alloy
A-561-71(1999) Standard Recommended Practice for Macrotech Testing of Tool Steel Bars
A-562/A-562M-90(2001) Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
A-563M-03 Standard Specification for Carbon and Alloy Steel Nuts [Metric]
A-563-00 Standard Specification for Carbon and Alloy Steel Nuts
A-564/A-564M-02a Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
A-565-03b Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
A-568/A-568M-03 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A-571/A-571M-01 Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
A-572/A-572M-03ae1 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A-573/A-573M-00a Standard Specification for Structural Carbon Steel Plates of Improved Toughness
A-574-00 Standard Specification for Alloy Steel Socket-Head Cap Screws
A-574M-00 Standard Specification for Alloy Steel Socket-Head Cap Screws [Metric]
A-575-96(2002) Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
A-576-90b(2000) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
A-577/A-577M-90(2001) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
A-578/A-578M-96(2001) Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications
A-579-01 Standard Specification for Superstrength Alloy Steel Forgings
A-580/A-580M-98 Standard Specification for Stainless Steel Wire
A-581/A-581M-95b(2000) Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
A-582/A-582M-95b(2000)e1 Standard Specification for Free-Machining Stainless Steel Bars
A-586-98 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand and Zinc-Coated Wire for Spun-In-Place Structural Strand
A-587-96(2001) Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
A-588/A-588M-03 Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4-in. [100-mm] Thick
A-589-96(2001) Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
A-591/A-591M-98 Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass] Applications
A-592/A-592M-89(1999) Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Fittings and Parts for Pressure Vessels
A-595-98(2002) Standard Specification for Steel Tubes, Low-Carbon, Tapered for Structural Use
A-596/A-596M-95(1999) Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens
A-597-87(1999) Standard Specification for Cast Tool Steel
A-598/A-598M-02 Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores
A-599/A-599M-02 Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
A-600-92a(1999) Standard Specification for Tool Steel High Speed
A-601-96(2000) Standard Specification for Electrolytic Manganese Metal
A-602-94(1998) Standard Specification for Automotive Malleable Iron Castings
A-603-98(2003) Standard Specification for Zinc-Coated Steel Structural Wire Rope
A-604-93(2003) Standard Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
A-606-01 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
A-608/A-608M-02 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
A-609/A-609M-91(2002) Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
A-610-79(2000) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
A-612/A-612M-03 Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
A-615/A-615M-04 Standard Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
A-618-01 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
A-623-03 Standard Specification for Tin Mill Products, General Requirements
A-623M-03 Standard Specification for Tin Mill Products, General Requirements [Metric]
A-624/A-624M-98 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
A-625/A-625M-03 Standard Specification for Tin Mill Products, Black Plate, Single Reduced
A-626/A-626M-98 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
A-627-03 Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
A-629-88(1994)e1 Standard Specification for Tool-Resisting Steel Flat Bars and Shapes for Security Applications
A-630-03 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
A-632-02a Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
A-633/A-633M-01 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
A-635/A-635M-02 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Commercial Steel, Drawing Steel, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, Hot-Rolled, General Requirements for
A-636-76(2000) Standard Specification for Nickel Oxide Sinter
A-638/A-638M-00 Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
A-640-97(2002)e1 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
A-641/A-641M-98 Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
A-644-98(2003) Standard Terminology Relating to Iron Castings
A-645/A-645M-99a Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
A-646-95(1999) Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
A-648-95(2000) Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe
A-649/A-649M-99(2003) Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
A-650/A-650M-03 Standard Specification for Tin Mill Products, Black Plate, Double Reduced
A-653/A-653M-03 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A-656/A-656M-03 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
A-657/A-657M-03 Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
A-659/A-659M-97(2001) Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
A-660-96(2001) Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
A-662/A-662M-03 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A-663/A-663M-89(2000) Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
A-664-99 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
A-666-03 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
A-667/A-667M-87(2003) Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
A-668/A-668M-03 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
A-671-96(2001) Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
A-672-96(2001) Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
A-673/A-673M-02 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
A-674-00 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
A-675/A-675M-03 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A-677/A-677M-99 Standard Specification for Nonoriented Electrical Steel Fully Processed Types
A-678/A-678M-00a Standard Specification for Quenched-and-Tempered Carbon and High-Strength Low-Alloy Structural Steel Plates
A-679/A-679M-00 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
A-681-94(1999) Standard Specification for Tool Steels Alloy
A-682/A-682M-02 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For
A-683/A-683M-99 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types
A-684/A-684M-86(2002) Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
A-686-92(1999) Standard Specification for Tool Steel, Carbon
A-688/A-688M-03 Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
A-689-97(2002) Standard Specification for Carbon and Alloy Steel Bars for Springs
A-690/A-690M-00a Standard Specification for High-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in Marine Environments
A-691-98(2002) Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
A-693-03 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A-694/A-694M-03 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
A-696-90a(2000) Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
A-697/A-697M-03 Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
A-698/A-698M-02 Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
A-700-99e1 Standard Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment
A-701-96(2000) Standard Specification for Ferromanganese-Silicon
A-702-89(2000) Standard Specification for Steel Fence Posts and Assemblies, Hot Wrought
A-703/A-703M-03 Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
A-704/A-704M-01 Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
A-705/A-705M-95(2000) Standard Specification for Age-Hardening Stainless Steel Forgings
A-706/A-706M-04 Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
A-707/A-707M-02 Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
A-709/A-709M-03a Standard Specification for Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges
A-710/A-710M-02 Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
A-711-03 Standard Specification for Steel Forging Stock
A-712-97(2002) Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys
A-713-93(1998) Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
A-714-99(2003) Standard Specification for High-Strength Low-Alloy Welded and Seamless Steel Pipe
A-716-03 Standard Specification for Ductile Iron Culvert Pipe
A-717/A-717M-01 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens
A-719/A-719M-02 Standard Test Method for Lamination Factor of Magnetic Materials
A-720/A-720M-02 Standard Test Method for Ductility of Nonoriented Electrical Steel
A-721/A-721M-02 Standard Test Method for Ductility of Oriented Electrical Steel
A-722/A-722M-98(2003) Standard Specification for Uncoated High-Strength Steel Bar for Prestressing Concrete
A-723/A-723M-02 Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
A-724/A-724M-99 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels
A-726-00 Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
A-727/A-727M-02 Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
A-729-93(1999) Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
A-730-93(1999) Standard Specification for Forgings, Carbon and Alloy Steel, for Railway Use
A-732/A-732M-02 Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
A-733-03 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
A-734/A-734M-87a(2003) Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered
A-735/A-735M-03 Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
A-736/A-736M-03 Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel
A-737/A-737M-99 Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
A-738/A-738M-03a Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A-739-90a(2000) Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
A-740-98(2003) Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
A-741-98(2003) Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail
A-742/A-742M-03 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
A-743/A-743M-03 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A-744/A-744M-00e1 Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
A-745/A-745M-94(2003) Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
A-746-03 Standard Specification for Ductile Iron Gravity Sewer Pipe
A-747/A-747M-99 Standard Specification for Steel Castings, Stainless, Precipitation Hardening
A-748/A-748M-87(2003) Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
A-749/A-749M-97(2002) Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
A-750-77(1994)e1 Standard Specification for Steel Air Ventilating Grille Units for Detention Areas
A-751-01 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
A-752-93(2003) Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
A-752M-93(2003) Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]
A-753-02 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)
A-754/A-754M-96(2000) Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
A-755/A-755M-01 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A-756-94(2001) Standard Specification for Stainless Anti-Friction Bearing Steel
A-757/A-757M-00 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
A-758/A-758M-00 Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
A-759-00 Standard Specification for Carbon Steel Crane Rails
A-760/A-760M-01a Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
A-761/A-761M-03 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
A-762/A-762M-00 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
A-763-93(1999)e1 Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
A-764-95(2001) Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
A-765/A-765M-01 Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
A-767/A-767M-00b Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
A-768-95(2001) Standard Specification for Vacuum-Treated 12% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
A-769/A-769M-00 Standard Specification for Carbon and High-Strength Electric Resistance Welded Steel Structural Shapes
A-770/A-770M-03 Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
A-771/A-771M-95(2001) Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components
A-772/A-772M-00 Standard Test Method for ac Magnetic Permeability of Materials Using Sinusoidal Current
A-773/A-773M-01 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
A-774/A-774M-02 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
A-775/A-775M-01 Standard Specification for Epoxy-Coated Reinforcing Steel Bars
A-778-01 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
A-779/A-779M-00 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete
A-780-01 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
A-781/A-781M-03a Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A-782/A-782M-90(2001) Standard Specification for Pressure-Vessel Plates, Quenched-and-Tempered, Manganese-Chromium-Molybdenum-Silicon Zirconium Alloy Steel
A-786/A-786M-00b Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
A-787-01 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
A-788-03a Standard Specification for Steel Forgings, General Requirements
A-789/A-789M-02a Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
A-790/A-790M-03 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
A-792/A-792M-03 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
A-793-96(2001) Standard Specification for Rolled Floor Plate, Stainless Steel
A-794-97(2002) Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled
A-795-00 Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
A-796/A-796M-03 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
A-798/A-798M-01 Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
A-799/A-799M-92(2002) Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
A-800/A-800M-01 Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof
A-801/A-801M-99 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys UNS R30005 and K92650
A-802/A-802M-95(2001) Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
A-803/A-803M-03 Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes
A-804/A-804M-99 Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens
A-805-93(2002) Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
A-807/A-807M-02e1 Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
A-808/A-808M-00a Standard Specification for High-Strength, Low-Alloy Carbon, Manganese, Columbium, Vanadium Steel of Structural Quality with Improved Notch Toughness
A-809-98 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
A-810-01 Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
A-811-03 Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy (P/M) Techniques
A-813/A-813M-01 Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
A-814/A-814M-03 Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
A-815/A-815M-01a Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
A-817-03 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
A-818-91(2001) Standard Specification for Coppered Carbon Steel Wire
A-820-01 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
A-821/A-821M-99 Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Tanks
A-822-90(2000) Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
A-823-99(2003) Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
A-824-01 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
A-826/A-826M-95(2001) Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-Cooled Reactor Core Components
A-827/A-827M-02 Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
A-829/A-829M-00 Standard Specification for Alloy Structural Steel Plates
A-830/A-830M-02 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
A-831/A-831M-95(2000) Standard Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings for Liquid Metal Cooled Reactor Core Components
A-832/A-832M-99e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
A-833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
A-834-95(2001) Standard Specification for Common Requirements for Iron Castings for General Industrial Use
A-835-84(2000) Standard Specification for Sizes of Ferroalloys and Alloy Additives
A-836/A-836M-02 Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
A-837/A-837M-03 Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
A-838-02 Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications
A-839-02 Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications
A-840/A-840M-00 Standard Specification for Fully Processed Magnetic Lamination Steel
A-841/A-841M-03a Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
A-842-85(1997) Standard Specification for Compacted Graphite Iron Castings
A-844/A-844M-93(1999) Standard Specification for Steel Plates, 9% Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
A-845-85(2000) Standard Specification for Titanium Scrap for Use in Deoxidation and Alloying of Steel
A-846-85(2000) Standard Specification for Aluminum Scrap for Use in Deoxidation and Alloying of Steel
A-847-99a(2003) Standard Specification for Cold-Formed Welded and Seamless High Strength, Low Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
A-848-01 Standard Specification for Low-Carbon Magnetic Iron
A-849-00 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
A-852/A-852M-03 Standard Specification for Quenched and Tempered Low-Alloy Structural Steel Plate with 70 ksi [485 MPa] Minimum Yield Strength to 4 in. [100 mm] Thick
A-853-93(2003) Standard Specification for Steel Wire, Carbon, for General Use
A-854/A-854M-98(2003) Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
A-855/A-855M-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
A-856/A-856M-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
A-857/A-857M-00a Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
A-858/A-858M-00 Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
A-859/A-859M-02 Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
A-860/A-860M-00 Standard Specification for Wrought High-Strength Low-Alloy Steel Butt-Welding Fittings
A-861-02 Standard Specification for High-Silicon Iron Pipe and Fittings
A-862/A-862M-98 Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
A-865-03 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
A-866-01 Standard Specification for Medium Carbon Anti-Friction Bearing Steel
A-867-03 Standard Specification for Iron-Silicon Relay Steels
A-871/A-871M-03 Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
A-872/A-872M-02 Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
A-874/A-874M-98 Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
A-875/A-875M-02a Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process
A-876-03 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types
A-877/A-877M-99 Standard Specification for Steel Wire, Chromium-Silicon Alloy Valve Spring Quality
A-878/A-878M-99 Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
A-879-00 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A-880-95 Standard Practice for Criteria for Use in Evaluation of Testing Laboratories and Organizations for Examination and Inspection of Steel, Stainless Steel, and Related Alloys
A-881/A-881M-02 Standard Specification for Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties
A-882/A-882M-02a Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
A-883/A-883M-01 Standard Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials
A-884/A-884M-02 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Fabric for Reinforcement
A-885/A-885M-96(2002) Standard Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer, Culvert, and Underdrain Pipe
A-886/A-886M-02 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
A-887-89(2000) Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
A-888-03 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
A-889/A-889M-03 Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Inductions Using the Wattmeter-Varmeter-Ammeter-Voltmeter Method and 25-cm (250-mm) Epstein Frame
A-890/A-890M-99(2003) Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
A-891-98(2003) Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
A-892-88(2001) Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
A-893/A-893M-03 Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
A-894/A-894M-00 Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials
A-895-89(2000) Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
A-896-89(1999) Standard Practice for Conducting Case Studies on Galvanized Structures
A-897/A-897M-03 Standard Specification for Austempered Ductile Iron Castings
A-898/A-898M-91(2001) Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
A-899-91(2002) Standard Specification for Steel Wire, Epoxy-Coated
A-900/A-900M-01 Standard Test Method for Lamination Factor of Amorphous Magnetic Strip
A-901-03 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types
A-902-03 Standard Terminology Relating to Metallic Coated Steel Products
A-903/A-903M-99(2003) Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
A-904-98 Standard Specification for 50 Nickel-50 Iron Powder Metallurgy (P/M) Soft Magnetic Alloys
A-905-93(1998) Standard Specification for Steel Wire, Pressure Vessel Winding
A-906/A906M-02 Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
A-908-03 Standard Specification for Stainless Steel Needle Tubing
A-909-03 Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
A-910/A-910M-99 Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete
A-911/A-911M-02 Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties
A-912-93(1998) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
A-913/A-913M-03 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
A-914/A-914M-92(1999)e1 Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
A-915/A-915M-93(2003) Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
A-917-00 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
A-918-00 Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A-920/A-920M-02a Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
A-921/A-921M-93(1999) Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
A-922-93(2000) Standard Specification for Silicon Metal
A-923-03 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels
A-924/A-924M-99 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A-925-98 Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
A-926-03 Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
A-927/A-927M-99 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
A-928/A-928M-00 Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
A-929/A-929M-01 Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A-930-03 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
A-931-96(2002) Standard Test Method for Tension Testing of Wire Ropes and Strand
A-932/A-932M-01 Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
A-933/A-933M-95(2001) Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement
A-934/A-934M-03 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
A-937/A-937M-01 Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces
A-938-97(2003) Standard Test Method for Torsion Testing of Wire
A-939-96(2001) Standard Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
A-940-96(2001) Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
A-941-03 Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A-942-95(2001) Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion- Resistant Roll Shells
A-943/A-943M-01 Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
A-944-99 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
A-945/A-945M-00 Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
A-946-95(2000) Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service
A-947M-95(2000) Standard Specification for Textured Stainless Steel Sheet [Metric]
A-949/A-949M-01 Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
A-950/A-950M-99(2003) Standard Specification for Fusion Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
A-951-02 Standard Specification for Masonry Joint Reinforcement
A-952/A-952M-02 Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
A-953-02 Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Tubing
A-954-02 Standard Specification for Austenitic Chromium-Nickel-Silicon Alloy Steel Seamless and Welded Pipe
A-955/A-955M-03b Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement
A-956-02 Standard Test Method for Leeb Hardness Testing of Steel Products
A-957-03 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A-958-00 Standard Specification for Steel Castings, Carbon, and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
A-959-03 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
A-960-03 Standard Specification for Common Requirements for Wrought Steel Piping Fittings
A-961-02 Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
A-962/A-962M-03 Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range
A-964/A-964M-02 Standard Specification for Corrugated Steel Box Culverts
A-965/A-965M-02 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
A-966/A-966M-96(2001) Standard Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current
A-967-01e1 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
A-968/A-968M-96(2001) Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service
A-970/A-970M-98 Standard Specification for Welded or Forged Headed Bars for Concrete Reinforcement
A-971-00 Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils
A-972/A-972M-00 Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
A-973/A-973M-01 Standard Specification for Grade 100 Alloy Steel Chain
A-974-97(2003) Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)
A-975-97(2003) Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
A-976-03 Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application
A-977/A-977M-02 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
A-978/A-978M-97(2002)e1 Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
A-979/A-979M-03 Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
A-980-97(2003) Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
A-981-97(2002) Standard Test Method for Evaluating Bond Strength for 15.2 mm (0.6 in.) Diameter Prestressing Steel Strand, Grade 270, Uncoated, Used in Prestressed Ground Anchors
A-982-02 Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
A-983/A-983M-01 Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
A-984/A-984M-03 Standard Specification for Steel Line Pipe, Black, Plain-End, Electric-Resistance-Welded
A-985/A-985M-03 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
A-986/A-986M-01 Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
A-987-00 Standard Test Method for Measuring Shape Characteristics of Tin Mill Products
A-988-98(2002) Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A-989-98(2002) Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A-990-03 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
A-991/A-991M-98 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
A-992/A-992M-03 Standard Specification for Structural Steel Shapes
A-993-98 Standard Test Method for Dynamic Tear Testing of Cast Irons to Establish Transition Temperature
A-994-03 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
A-995/A995M-98(2003) Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
A-996/A-996M-03b Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
A-997-98(2003) Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
A-998/A-998M-98 Standard Practice for Structural Design of Reinforcements for Fittings in Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
A-999/A-999M-01 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
A-1000-99 Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
A-1001-01 Standard Specification for High Strength Steel Castings in Heavy Sections
A-1002-99(2003) Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
A-1003/A-1003M-02a Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
A-1004/A-1004M-99 Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members



Certificate & Inspection : c/w Calibration Works Certificate EN10204 3.1/DIN 50049 3.1/ISO 10474 Mill Test Report, NACE MR-01-03/NACE MR-01-75/ISO-15156, CE Marked, European Pressure Equipment Directive PED 97/23/EC, AD 2000-WO, ASME Boiler & Pressure Vessel Code Section-II Part-A Edition 2008, API 6A, with 3.2 certificate duly certified & approved by LRS-Lloyd's Register, GL-Germanischer Lloyd, BV-Bureau Veritas, DNV-Det Norske Veritas, ABS-American Bureau of Shipping, SGS, TUV, RINA, IRS (Indian Register of Shipping), Class NK (Nippon Kaiji Kyokai), KR (Korean Register of Shipping), NORSOK APPROVED STANDARD M630, M650 Rev.3
 

Regards,