Structural Plate

STRUCTURAL STEEL QUALITY PLATES

Specification	Chemical Max						Mechanical Mpa, min
	C Max	Mn Max	Si Max	S Max	P Max	Macro Alloy	Tensile Min	Yield Min	%EL 50 GL	Min 200 GL	Bend	Impact

ASTM A 36	0.26	1.2	0.15 0.40	0.05	0.04	---	400-550	250	21	18	2T	---
IS 2062
Gr - A	0.23	1.5	---	0.05	0.05	---	410	250	23	---	3T	---
B	0.22	1.5	0.4	0.045	0.045	---	410	250	23	---	2T	27 J at 0O C
C	0.20	1.5	0.4	0.040	0.040	---	410	250	23	---	2T	27 J at -20o C
IS 5986	0.20	1.30	---	0.045	0.045	---	410-520	255	---	---	3T	---
FE - 410
GB 700 Q235 B	0.14 0.18	0.40 0.60	0.30	0.035	0.035	---	375-460	235	26	---	---	27 J at 0O C
JIS G 3101	0.14 0.20	0.80 1.00	0.15 0.30	0.035	0.035	---	400-510	245	---	---	---	---
SS 400
EN 10025
S235 JR	0.12 0.17	0.4 0.6	0.15 0.30	0.035	0.035	---	340-470	235	24	---	---	+20° C 27 J
S235 JO	0.12 0.17	0.40 0.60	0.15 0.30	0.030	0.030	---	340-470	235	24	---	---	0° C 27 J
S275 JR	0.16 0.20	0.9 1.15	0.17 0.37	0.035	0.035	---	410-560	275	22	---	---	+20° C 27 J
S275 JO	0.16 0.20	0.9 1.15	0.17 0.37	0.030	0.030	---	410-560	275	20	---	---	0° C 27 J
S275 J2 G3 / J2 + N	0.14 0.18	1.2 1.5	0.17 0.37	0.025	0.025	---	410-560	275	20	---	---	-20° C 27 J
EN 10025
S 355 JR	0.20	1.6	0.35 0.55	0.035	0.035	---	490 630	355	22	---	---	+20C / 27J
S 355 JO	0.20	1.6	0.35 0.55	0.030	0.030	---	490 630	355	22	---	---	0C / 27J
S 355 J2 G3 / J2 + N	0.20	1.6	0.55	0.025	0.025	---	490 630	355	20	---	---	-20C / 27J
S 355 K2 G3 / K2 + N	0.20	1.6	0.55	0.025	0.025	---	490 630	355	20	---	---	-20C / 40J
SAILMA
350 HI	0.20	1.5	---	0.04	0.04	0.30	490 610	350	21	---	3T	-20C / 30J
410 HI	0.20	1.5	---	0.04	0.04	0.30	540 660	410	20	---	3T	-20C / 25J
450 HI	0.20	1.5	---	0.04	0.04	0.30	570 720	450	19	---	3T	-20C / 20J
550 HI	0.22	1.7	---	0.04	0.04	0.30	690 850	550	17	---	4T	-20C / 18J
IS8500
FE 490 B	0.20	1.5	0.45	0.04	0.04	0.25	490	350	22	---	3T	-20C / 25J
540 B	0.20	1.6	0.45	0.04	0.04	0.25	540	410	20	---	3T	-20C / 25J
570 B	0.22	1.6	0.45	0.04	0.04	0.25	570	450	20	---	3T	-20C / 20J
DIN 17100
ST52 - 3	0.20 0.22	1.6	0.55	0.04	0.04	---	490 630	355	18	---	---	-20C / 27J
GB 700
Q 345 B	0.20	1.0 1.6	0.35 0.50	0.04	0.04	0.20	460 630	345	21	---	---	+20C /34J
D	0.20	1.0 1.6	0.55	0.03	0.03	0.20	470 630	345	22	---	---	-20C / 34J
E	0.20	1.0 1.6	0.55	0.03	0.03	0.20	470 630	345	22	---	---	-40C / 27J
BS 4360
Gr 50 B	0.15 0.20	1.2 1.5	0.35 0.50	0.035	0.035	---	490 640	355	20	---	---	+20C / 27J
50 C	0.15 0.20	1.2 1.5	0.35 0.50	0.035	0.035	---	490 640	355	20	---	---	0C / 27J

List of certified steel of EN 10025+A1; the certification made by the Technical Inspection Body TUV Nord e.V. according to National Standards of European Inion states (Ilyich Iron and Steel Works)

European Standard EN 10025+A1 (1993)

EN 10025:1990

Germany
DIN 17100

France
NF A35-501

England BS 4360

Spain
36080-90 UNE

Italy
EN10025 UNJ

Belgium EN10025 NBN

Sweden XXXX-XX SS

Portugal EN 10025

Austria EN10025 ONORM

Norway
XX XXX NS

Grade of steel

Number material

S235JRG2
S235JO

S235J2G3
S235J2G3

1.0038
1.0114

1.0116
1.0117

Fe360 BFN
Fe360 C

Fe360 D1
Fe360 D2

RSt37-2
St37-3 U

St37-3 N

E 24-3

E 24-4

40B
40C

40D

AE 235B-FN
AE 235 C

AE 235 D

Fe 360 C

Fe 360 D

AE 235-C

AE 235-D

t312-00

Fe 360-C

Fe 360-D

RSt 360 B
St 360 C

St 360 CE
St 360 D

NS 12 123
NS 12 124

NS 12 124

S275JR
S275JO

S275J2G3
S275J2G4

1.0044
1.0143

1.0144
1.0145

Fe430 B
Fe430 C

Fe430 D1
Fe430 D2

St44-2
St44-3 U

St44-3 N

E 28-2
E 28-3

E 28-4

43B
43C

43D

AE 275 B
AE 275 C

AE 275 D

Fe 430 B
Fe 430 C

Fe 430 D

AE 255-B
AE 255-C

AE 255-D

14 12-00

14 14-00
14 14-01

Fe 430-B
Fe 430-C

Fe 430-D

St 430 B
St 430 C

St 430 CE
St 430 D

NS 12 142
NS 12 143

NS 12 143

S355JR
S355JO
S355J2G3
S355J2G4
S355K2G3

1.0045
1.0553
1.0570
1.0577
1.0595

Fe510 B
Fe510 C
Fe510 D1
Fe510 D2
Fe510 DD1

St52-3 U
St52-3 N

E 36-2
E 36-3

E 36-4

50B
50C
50D

50DD

AE 355 B
AE 355 C
AE 355 D

Fe 510-B
Fe 510-C
Fe 510-D

AE 355-B
AE 355-C
AE 355-D

AE 355-DD

Fe 510-B
Fe 510-C
Fe 510-D

Fe 510-DD

St 510 C
St 510 D

NS 12 153
NS 12 153

Technical characteristics of plates of 8-30 mm thickness made of structural carbon steel according to European Standard EN 10025 +A1 (DIN 17100) (Ilyich Iron and Steel Works).

Standard number

EN 10025+A1
DIN 17100

Grade of steel EN 10025
DIN 17100

S235JRG2
RSt37-2

S235JO

S235J2G3
St37-3

S235J2G4

S275JR
St44-2

S275JO

S275J2G3
St44-3

S275J2G4

S355JR

S355JO

S355J2G3
St52-3

S355J2G4

S355K2G3

Name of elements

Chemical composition of steel
Element mass share, %

C
Mn
Si
P
S
Al (general)
N

<=0,17
<=1,40
-
<=0,045
<=0,045
-
<=0,009

<=0,17
<=1,40
-
<=0,040
<=0,040
-
<=0,009

<=0,17
<=1,40
-
<=0,035
<=0,035
>=0,020
-

<=0,21
<=1,50
-
<=0,045
<=0,045
-
<=0,009

<=0,18
<=1,50
-
<=0,040
<=0,040
-
<=0,009

<=0,18
<=1,50
-
<=0,035
<=0,035
>=0,020
-

<=0,24
<=1,60
<=0,55
<=0,045
<=0,045
-
-

<=0,20
<=1,60
<=0,55
<=0,040
<=0,040
-
-

<=0,20
<=1,60
<=0,55
<=0,035
<=0,035
>=0,035
-

<=0,20
<=1,60
<=0,55
<=0,035
<=0,035
>=0,020
-

C equivalent

<=0,35

<=0,40

<=0,45

Name of characteristics

Mechanical properties
Values of characteristics

Yield point
R eN , N/mm²
S <= 16 mm
S > 16 mm

>=235
>=225

>=275
>=265

>=355
>=345

Tensile strength Rm, N/mm²

340-470

410-560

490-630

Elongation at rupture
A, % (L_o=5,65 S_o )
longitudinal
transverse

>=26
>=24

>=22
>=20

>=21
>=19

Impact work KV
(according to Sharpy),
J
+20^oC
0^oC
-20^oC

>=27
-
-

-
>=27
-

-
-
>=27

>=27
-
-

-
>=27
-

-
-
>=27

>=27
-
-

-
>=27
-

-
-
>=27

-
-
>=40

Technical characteristics of certified boiler and shipbuilding steel of 8-30 mm thickness (Ilyich Iron and Steel Works).

Kind of product

Boiler (heat resistant) steel

Shipbuilding steel

Standard number

EN 10028-2 (DIN 17155)

Lloyd's Register (UK), ABS (USA), requirements

Grade of steel

P235GH
(H l )

P265GH
(H l l )

P295GH
(17Mn4)

P355GH
(19Mn6)

AH32

DH32

AH36

DH36

Chemical composition of steel

Name of elements

Element mass share, %

Mn
Si
P
S
Al (general)
A (dissolved)
Cr
Cu
Ni
Mo
Ti
V
Nb

<=0,16
0,40-1,20
<=0,35
<=0,030
<=0,025
>=0,020
-
<=0,30
<=0,30
<=0,30
<=0,08
<=0,03
<=0,02
<=0,010

<=0,20
0,50-1,40
<=0,40
<=0,030
<=0,025
>=0,020
-
<=0,30
<=0,30
<=0,30
<=0,08
<=0,03
<=0,02
<=0,010

0,08-0,20
0,90-1,50
<=0,40
<=0,030
<=0,025
>=0,020
-
<=0,30
<=0,30
<=0,30
<=0,08
<=0,03
<=0,02
<=0,010

0,10-0,22
1,0-1,70
<=0,60
<=0,030
<=0,025
>=0,020
-
<=0,30
<=0,30
<=0,30
<=0,08
<=0,03
<=0,02
<=0,010

<=0,21
>=2,5xC_min
<=0,50
<=0,035
<=0,035
-
-
-
-
-
-
-
-
-

<=0,21
<=0,60
0,10-0,35
<=0,035
<=0,035
-
-
-
-
-
-
-
-
-

<=0,18
<=0,60
0,10-0,35
<=0,035
<=0,035
>=0,020
>=0,015
-
-
-
-
-
-
-

<=0,18
0,9-1,6
0,10-0,50
<=0,035
<=0,030
>=0,020
>=0,015
<=0,20
<=0,35
<=0,40
<=0,08
<=0,02
(0,05-0,10)^{^*}
(0,02-0,05)^{^*}

C equivalent

<=0,40

To be approved

Mechanical properties

Name of characteristics

Values of characteristics

ReN, N/mm² S<=16 mm
S>16 mm²

>=235
>=225

>=265
>=255

>=295
>=290

>=355
>=345

>=235

>= 315

>= 355

Rm, N/mm2

360-480

410-530

460-580

510-650

440-490 ( 400-520)**

440-590

490-620

A, % (L_o=5,65(S_o)^{^?})

>=25

>=23

>=22

>=21

>=22

>=21

Impact work (according to Sharpy), J

at 0^o C

0^oC

-20^oC

0^oC

-20^oC

0^oC

-20^oC

>= 27

>= 34

Re _0,2%, N/mm²
+300^oC
+400^oC

>= 130
>= 110

>= 155
>= 130

>= 185
>= 155

>= 215
>= 180

-
-

* To be approved
** ABS (USA) requirements

Table #2. Basic chemical composition of the steel smelted by the Ilyich Works and used for production of the rolled stock (Ilyich Iron and Steel Works).

Grade of steel	Content of elements, %
	C	Mn	Si	Cr	Ni	Cu	Al	S	P
	C	Mn	Si	Cr	Ni	Cu	Al	not more than
Carbon steel of common quality - GOST 380
St1kp Ct1ps Ct1sp St2kp St2ps St2sp St3kp St3ps St3sp	0,06-0,12 0,06-0,12 0,06-0,12 0,09-0,15 0,09-0,15 0,09-0,15 0,14-0,22 0,14-0,22 0,14-0,22	0,25-0,50 0,25-0,50 0,25-0,50 0,25-0,70 0,25-0,70 0,25-0,70 0,30-0,80 0,40-0,85 0,40-0,85	<=0,05 0,05-0,15 0,15-0,30 <=0,05 0,05-0,15 0,15-0,30 <=0,05 0,05-0,15 0,15-0,30	<=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30	<=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30	<=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30	- - - - - - - - -	0,050 0,050 0,050 0,050 0,050 0,050 0,050 0,050 0,050	0,040 0,040 0,040 0,040 0,040 0,040 0,040 0,040 0,040
Carbon steel of common quality - GOST 380
St3Gps St3Gsp St4sp St5ps St5sp	0,14-0,22 0,14-0,20 0,18-0,27 0,28-0,37 0,28-0,37	0,80-1,10 0,80-1,10 0,40-0,70 0,50-1,00 0,50-1,00	<=0,15 0,15-0,30 0,15-0,30 0,05-0,15 0,15-0,30	<=0,30 <=0,30 <=0,30 <=0,30 <=0,30	<=0,30 <=0,30 <=0,30 <=0,30 <=0,30	<=0,30 <=0,30 <=0,30 <=0,30 <=0,30	- - - - -	0,050 0,050 0,050 0,050 0,050	0,040 0,040 0,040 0,040 0,040
Structural high-grade carbon steel - GOST 1050
08kp 08p 08 10kp 10ps 10 15kp 15ps 15	0,05-0,12 0,05-0,11 0,05-0,12 0,07-0,14 0,07-0,14 0,07-0,14 0,12-0,19 0,12-0,19 0,12-0,19	0,25-0,50 0,35-0,65 0,35-0,65 0,25-0,50 0,35-0,65 0,35-0,65 0,25-0,50 0,35-0,65 0,35-0,65	<=0,03 0,05-0,17 0,17-0,37 <=0,07 0,05-0,17 0,17-0,37 <=0,07 0,05-0,17 0,17-0,37	<=0,10 <=0,10 <=0,10 <=0,15 <=0,15 <=0,15 <=0,25 <=0,25 <=0,25	<=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30	<=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30	- - - - - - - - -	0,040 0,040 0,040 0,040 0,040 0,040 0,040 0,040 0,040	0,035 0,035 0,035 0,035 0,035 0,035 0,035 0,035 0,035
Structural high-grade carbon steel - GOST 1050
20kp 20ps 20 25 30 40 45	0,17-0,24 0,17-0,24 0,17-0,24 0,22-0,30 0,27-0,35 0,37-0,45 0,42-0,50	0,25-0,50 0,35-0,65 0,35-0,65 0,50-0,80 0,50-0,80 0,50-0,80 0,50-0,80	<=0,07 0,05-0,17 0,17-0,37 0,17-0,37 0,17-0,37 0,17-0,37 0,17-0,37	<=0,25 <=0,25 <=0,25 <=0,25 <=0,25 <=0,25 <=0,25	<=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30	<=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30	- - - - - - -	0,040 0,040 0,040 0,040 0,040 0,040 0,040	0,035 0,035 0,035 0,035 0,035 0,035 0,035
Low carbon high-grade steel for cold stamping - GOST 9045
08U 08kp 08ps	<=0,07 <=0,10 <=0,09	0,20-0,35 0,20-0,40 0,20-0,45	<=0,01 <=0,03 <=0,04	<=0,03 <=0,10 <=0,10	<=0,06 <=0,10 <=0,10	<=0,06 <=0,15 <=0,15	0,02-0,07 - -	0,025 0,030 0,030	0,020 0,025 0,025
Structural high-grade carbon steel for cold stamping - GOST 4041
08UA	<=0,10	0,20-0,40	<=0,03	<=0,10	<=0,15	<=0,20	0,02-0,08	0,025	0,020
Low alloyed steel - GOST 19281
9G2S 09G2 09G2D 12GS 16GS 17GS 17G1S 14G2 10G2S1 10G2S1D 10XSND	<=0,12 <=0,12 <=0,12 0,09-0,15 0,12-0,18 0,14-0,20 0,15-0,20 0,12-0,18 <=0,12 <=0,12 <=0,12	1,3-1,7 1,4-1,8 1,4-1,8 0,8-1,2 0,9-1,2 1,0-1,4 1,15-1,6 1,2-1,6 1,3-1,65 1,3-1,65 0,5-0,8	0,5-0,8 0,17-0,37 0,17-0,37 0,5-0,8 0,4-0,7 0,4-0,6 0,4-0,6 0,17-0,37 0,8-1,1 0,8-1,1 0,8-1,1	<=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 0,6-0,9	<=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 0,5-0,8	<=0,30 <=0,30 0,15-0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 <=0,30 0,15-0,30 0,4-0,6	<=0,05 - - - - - - - - - -	0,040 0,040 0,040 0,040 0,040 0,040 0,040 0,040 0,040 0,040 0,040	0,035 0,035 0,035 0,035 0,035 0,035 0,035 0,035 0,035 0,035 0,035
Steel for shipbuilding - GOST 5521
A V A32 D32 A36 D36	<=0,21 <=0,21 <=0,21 <=0,18 <=0,18 <=0,18 <=0,18	0,6-1,0 0,6-1,1 0,6-1,4 0,9-1,6 0,9-1,6 0,9-1,6 0,9-1,6	0,15-0,35 0,15-0,35 0,15-0,35 0,15-0,50 0,15-0,50 0,15-0,50 0,15-0,50	<=0,30 <=0,30 <=0,30 <=0,20 <=0,20 <=0,20 <=0,20	<=0,30 <=0,30 <=0,30 <=0,40 <=0,40 <=0,40 <=0,40	<=0,30 <=0,30 <=0,30 <=0,35 <=0,35 <=0,35 <=0,35	- <=0,06 0,015-0,06 0,015-0,06 0,015-0,06 <=0,06 0,015-0,06	0,035 0,035 0,035 0,035 0,035 0,035 0,035	0,035 0,035 0,035 0,035 0,035 0,035 0,035

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN10204 3.1 Mill Test Certificate, NACE MR-0175 / ISO 15156, European Pressure Equipment Directive PED-97/23/EC, AD-2000-WO, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, API 6A, with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), SGS, TUV, ABS, RINA, IRS, NORSOK Approved

If you have any requirement of above items, please feel free to contact us

Regards,

CONTACT PERSON :

MUKESH SHAH
Director
Mobile No. 0091 - 9820292499
Email - marketing@rolexmetals.com

ROLEX METAL DISTRIBUTORS
( A METAL & STEEL Company )
57-A, KHATARGALLI,
THAKURDWAR,
MUMBAI - 400002, INDIA.
TEL.No. 0091-22-23858802
TEL.No. 0091-22-23823963
FAX No. 0091-22-23898724
Email - marketing@rolexmetals.com
Website – www.rolexmetals.com