DIN Material No.

UNALLOYED STRUCTURAL STEEL PLATES

If you wish to employ hot-rolled products made of structural steel according to DIN EN 10025 or DIN EN 10025-2 respectively, our unalloyed structural steel will be the right choice.

	DIN-Code	Material no.	Certificate	Plate thickness in mm	Width in mm	Length in mm
old new	S 235 JRG2 S 235 JR	1.0038	3.1 acc. to EN 10204 AD 2000 W1	3 - 250	1000 - 4000	up to	16000
old new	S 235 J2G3 S 235 J2	1.0116 1.0117	3.1 acc. to EN 10204 AD 2000 W1	3 - 250	1000 - 4000	up to	16000
old new	S 235 JRG2 C S 235 JR C	1.0122	3.1 acc. to EN 10204 AD 2000 W1	5 - 200	1000 - 3500	up to	16000
old new	S 355 J2G3 S 355 J2	1.0570 1.0577	3.1 acc. to EN 10204 AD 2000 W1	3 - 300	1000 - 4000	up to	16000
old new	S 355 J2G3 C S 355 J2 C	1.0569 1.0579	3.1 acc. to EN 10204 AD 2000 W1	3 - 200	1000 - 3000	up to	16000

FINE GRAIN STRUCTURAL STEEL PLATES

In this category you find hot-rolled products of weldable fine grain structural steel (normal annealed/hot-rolled annealed) according to DIN EN 10113-2 or DIN EN 10025-3 respectively.

DIN-code	Material no.	Certificate	Plate thickness in mm	Width in mm	Length in mm
S 275 N	1.0490	3.1 acc. to EN 10204	5 - 130	1000 - 4000	up to	16000
S 275 NL	1.0491	3.1 acc. to EN 10204	5 - 130	1000 - 4000	up to	16000
S 355 N	1.0545	3.1 acc. to EN 10204	3 - 150	1000 - 4000	up to	16000
S 355 NL	1.0546	3.1 acc. to EN 10204	3 - 150	1000 - 4000	up to	16000
S 460 N	1.8901	3.1 acc. to EN 10204	3 - 150	1000 - 4000	up to	16000
S 460 NL	1.8903	3.1 acc. to EN 10204	3 - 150	1000 - 4000	up to	16000

PRESSURE TANK STEEL DIN EN 10028-2 PLATES

Pressure tank steel can be unalloyed or alloyed steel with clearly fixed properties. These steel types are particularly suitable for application at high temperatures.

DIN-Code	Material no.	Certificate	Plate thickness in mm	Width in mm	Length in mm
P 265 GH	1.0425	3.1B acc. to EN 10204 AD 2000 W1	3 - 300	1000 - 4000	up to	16000
P 295 GH	1.0481	3.1A TÜV acc. to EN 10204 AD 2000 W1	5 - 120	1000 - 3500	up to	14000
16 Mo 3	1.5415	3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1	1,5 - 300	1000 - 3000	up to	14000
13 CrMo 4-5	1.7335	3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1	3 - 160	1000 -3000	up to	12000
10 CrMo 9-10	1.7380	3.1A TÜV acc. to EN 10204 AD 2000 W1	3 - 120	1000 - 3000	up to	12000

PRESSURE TANK STEEL DIN EN 10028-3 PLATES

This list shows you weld able fine grain structural steel types that are annealed the normal way.

DIN-Code	Material no.	Certificate	Plate thickness in mm	Width in mm	Length in mm
P 275 NH	1.0487	3.1B acc. to EN 10204	5 - 130	1000 - 4000	up to	16000
P 275 NL1	1.0488	3.1B acc. to EN 10204	5 - 130	1000 - 4000	up to	16000
P 275 NL2	1.1104	3.1B acc. to EN 10204	5 - 130	1000 - 4000	up to	16000
P 355 N	1.0562	3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10	3 - 220	1000 - 4000	up to	16000
P 355 NH	1.0565	3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10	3 - 220	1000 - 4000	up to	16000
P 355 NL1	1.0566	3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10	3 - 220	1000 - 4000	up to	16000
P 355 NL2	1.1106	3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10	3 - 220	1000 - 4000	up to	16000
P 460 NH	1.8935	3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10	4 - 180	1000 - 3000	up to	14000
P 460 NL1	1.8915	3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10	4 - 180	1000 - 3000	up to	14000
P 460 NL2	1.8918	3.1A TÜV bzw. 3.1B acc. to EN 10204 AD 2000 W1/W10	4 - 180	1000 - 3000	up to	14000

PRESSURE HYDROGEN RESISTANT STEEL PLATES

These are steel types that are alloyed with Cr and partly with Mo, Ni, V or W. They have especially been developed for work pieces that are exposed to hydrogen such as in the ammonia synthesis, carbo-hydrogenation or crude oil processing.

DIN-Code	Material no.	Certificate	Plate thickness in mm	Width in mm	Length in mm
12 CrMo 19 5	1.7362	3.1A TÜV acc. to EN 10204 AD 2000 W1	5 - 80	1000 - 3000	up to	12000

HEAT TREATED PLATES

Heat treated plates of high tensile fine grain structural steel DIN EN 10025-6 / DIN EN 10137-2
These steel types are employed for welded steel structures such as in manufacture of vehicles and mobile cranes. Further major applications are mining equipment, pressure tanks and pressure pipes.

DIN-Code	Material no.	Certificate	Plate thickness in mm	Width in mm	Length in mm
S 690 QL	1.8928	3.1B acc. to EN 10204	3 - 200	1000 - 3000	up to	15000
Maxil 690 (Salzgitter), Naxtra 70 (ThyssenKrupp Stahl), Dillimax 690T (Dillinger Hütte), Supralsim 690 (FaFer), Weldox 700E (SSAB)
S 890 QL	1.8983	3.1B acc. to EN 10204	4 - 120	1000 - 3000	up to	16000
Maxil 890 (Salzgitter), Xabo 890 (ThyssenKrupp Stahl), Dillimax 890T (Dillinger Hütte), Supralsim 890 (FaFer), Weldox 900E (SSAB)
S 960 QL	1.8933	3.1B acc. to EN 10204	4 - 100	1000 - 3000	up to	12000
Maxil 960 (Salzgitter), Xabo 960 (ThyssenKrupp Stahl), Dillimax 965T (Dillinger Hütte), Superelso 960 Q (FaFer), Weldox 960E (SSAB)

STEEL WITH HIGH YIELD POINT PLATES

Steel with high yield point for cold working DIN EN 10149-2
Here you find special steel types for cold working, such as for further processing of side bars and cross members, axle structures and other special profiles used e.g. in manufacture of vehicles. Here you find special steel types for cold working, such as for further processing of side bars and cross members, axle structures and other special profiles used e.g. in manufacture of vehicles.

DIN-Code	Material no.	Certificate	Plate thickness in mm	Width in mm	Length in mm
S 700 MC	1.8974	3.1B acc. to EN 10204	2,5 - 25	1000 - 2500	up to	12000

HEAT TREATABLE AND CASE HARDENING STEEL PLATE

Our heat treatable steel according to DIN EN 10083-1 and -2 comprises steel types used in mechanical engineering and suitable for tempering due to their chemical composition.

Case hardening steel according to DIN EN 10084 covers steel types of relatively low carbon content, destined for carbonising or carbo-nitrating with subsequent tempering.

DIN-Code	Material no.	Cerificate	Plate thickness in mm	Width in mm	Length in mm
C 45	1.0503	3.1B acc. to EN 10204	2 - 150	1000 - 3000	up to	14000
C 60	1.0601	3.1B acc. to EN 10204	2 - 150	1000 - 3000	up to	12000
42 CrMo 4	1.7225	3.1B acc. to EN 10204	3 - 200	1000 - 2500	up to	14000
16 MnCr 5	1.7131	3.1B acc. to EN 10204	3 - 200	1000 -2500	up to	12000
20 MnCr 5	1.7147	3.1B acc. to EN 10204	3 - 200	1000 - 2500	up to	12000

MANGANESE STEEL PLATES

This steel quality is used for wear resistant pieces under shock and pressure loads – e.g. for crusher plates, wearing edges of machines removing overburden of open cast mines, and for walls and core pieces of concrete stone moulds.

DIN-Code	Material no.	Certificate	Plate thickness in mm	Width in mm	Length in mm
X 120 Mn 12	1.3401	3.1B acc. to EN 10204	1,5 - 40	1000 - 2000	up to	6000

WEAR RESISTANT STEEL PLATES

Fields of application for these steel types are e.g. construction machinery, conveying plants, dumper troughs, transport and crushing plants etc.

DIN-Code	Material no.	Certificate	Plate thickness in mm	Width in mm	Length in mm
37 Mn 7 / Semi-Manax		3.1B acc. to EN 10204	3 - 40	1000 - 1500	up to	6000
VSS 295 / PS 265 H	1.8704	3.1B acc. to EN 10204	3 - 75	1000 - 3000	up to	12000
Water hardened 400 HB Steel		3.1B acc. to EN 10204	3 - 120	1000 - 3000	up to	12000
Brinar 400 (Salzgitter), XAR 400 (ThyssenKrupp Stahl), Dillidur 400 V (Dillinger Hütte), Fora 400 (FaFer)
Air hardened 400 HB Steel	1.8709	3.1B acc. to EN 10204	5 - 120	1000 - 3000	up to	12000
Brinar 400 Cr (Salzgitter)
Water hardened 500 HB Steel		3.1B acc. to EN 10204	5 - 100	1000 -3000	up to	12000
Brinar 500 (Salzgitter), XAR 500 (ThyssenKrupp Stahl)
Water hardened 500 HB Steel with increased chromium content	1.8710	3.1B acc. to EN 10204	6 - 60	1000 - 3000	up to	12000
Brinar 500 Cr (Salzgitter)

STEEL PLATES ACCORDING TO ASTM/ASME STANDARD

Grade	Certificate	Plate thickness in mm	Wiidth in mm	Length in mm
A / SA 516 Gr. 60	3.1B acc. to EN 10204	3 - 300	1000 - 4000	up to	16000
A / SA 516 Gr. 70	3.1B acc. to EN 10204	3 - 220	1000 - 4000	up to	16000
A / SA 387 Gr. 11 Cl. 2	3.1B acc. to EN 10204	6 - 60	1000 - 3000	up to	12000
A / SA 387 Gr. 12 Cl. 2	3.1B acc. to EN 10204	3 - 150	1000 -3000	up to	12000
A / SA 387 Gr. 22 Cl. 2	3.1B acc. to EN 10204	4 - 120	1000 - 2500	up to	12000
A / SA 283 Gr. C	3.1B acc. to EN 10204	3 - 120	1000 - 2500	up to	12000
A / SA 285 Gr. C	3.1B acc. to EN 10204	3 - 120	1000 - 2500	up to	12000
A / SA 387 Gr. 5 Cl. 2	3.1B acc. to EN 10204	5 - 80	1000 - 2500	up to	12000

OFFSHORE SPECIAL GRADE PLATES

These are weld able structural steel types for application in stationary structures in coastal areas according to BS 7191.

DIN-Code	Certificate	Plate thickness in mm	Width in mm	Length in mm
EMZ 355	3.1C LRS acc. to EN 10204	10 - 200	1000 - 3050	up to	12000
API 2H Gr. 50	3.1 acc. to EN 10204	10 - 200	1000 - 3050	up to	12000

SHIP-BUILDING GRADE PLATES

Ship-building grades according to classification institutions

DIN-Code	Certificate	Plate thickness in mm	Width in mm	Length in mm
Schiffbaugüte Gr. A	3.1C acc. to EN 10204 GL, LRS, DNV, ABS, BV, RINA	3 - 200	1000 - 4000	up to	16000
Schiffbaugüte Gr. B	3.1C acc. to EN 10204 GL, LRS, DNV, ABS, BV, RINA	3 - 200	1000 - 4000	up to	16000
Schiffbaugüte Gr. D	3.1C acc. to EN 10204 GL, LRS, DNV, ABS, BV, RINA	3 - 200	1000 - 4000	up to	16000
Schiffbaugüte Gr. E	3.1C acc. to EN 10204 GL, LRS, DNV, ABS, BV, RINA	3 - 200	1000 - 4000	up to	16000
Schiffbaugüte Gr. A 32	3.1C acc. to EN 10204 GL, LRS, DNV, ABS, BV, RINA	3 - 200	1000 - 4000	up to	16000
Schiffbaugüte Gr. D 32	3.1C acc. to EN 10204 GL, LRS, DNV, ABS, BV, RINA	3 - 200	1000 - 4000	up to	16000
Schiffbaugüte Gr. E 32	3.1C acc. to EN 10204 GL, LRS, DNV, ABS, BV, RINA	3 - 200	1000 - 4000	up to	16000
Schiffbaugüte Gr. A 36	3.1C acc. to EN 10204 GL, LRS, DNV, ABS, BV, RINA	3 - 200	1000 - 4000	up to	16000
Schiffbaugüte Gr. D 36	3.1C acc. to EN 10204 GL, LRS, DNV, ABS, BV, RINA	3 - 200	1000 - 4000	up to	16000
Schiffbaugüte Gr. E 36	3.1C acc. to EN 10204 GL, LRS, DNV, ABS, BV, RINA	3 - 200	1000 - 4000	up to	16000
Schiffbaugüte Gr. E 40	3.1C acc. to EN 10204 GL, LRS, DNV, ABS, BV, RINA	6 - 60	2000 - 3500	up to	16000
Grades DH 36 and EH 36 are also available as TM steel

HOT-ROLLED FLATS BULB STEEL

Hot-rolled flat bulb steel - HP-profiles
This flat steel ranks among hot-rolled profiles (former “Dutch profile”) and shows on one broadside a bulb over its entire length.

DIN-Code	Certificate	Dimensions	Length in mm
Schiffsbaugüte Gr. A	3.1C acc. to EN 10204 GL, LRS, DNV, ABS, BV, RINA	80 x 5 - 430 x 17	12000 / 16000
Schiffsbaugüte Gr. A 36	3.1C acc. to EN 10204 GL, LRS, DNV, ABS, BV, RINA	80 x 5 - 430 x 17	12000 / 16000
Schiffsbaugüte Gr. D 36	3.1C acc. to EN 10204 GL, LRS, DNV, ABS, BV, RINA	80 x 5 - 430 x 17	12000 / 16000

COMPARATIVE CHART OF EQUIVALENT STANDARDS FOR HOT ROLLED STEEL
Sr. No.	EN 10025-90 +A1-93	ITALIA UNI 7070	GERMANIA DIN 17100	FRANCIA AFNOR NF A 35.501	G.B. B.S. 4360	SPAGNA UNE 36080	CHINESE STANDARDS	USA ASTM
1	S185	Fe 320	St 33	A 33	-	A 310-0	Q 195	-
2	S235JR	Fe 360 B	St 37-2	E 24-2	40 A	-	Q235 AC	A 283 GR.C/GR.B
3	S235JO	Fe 360 C	St 37 -3U	E 24-3	40 C	AE 235 C	Q 235 C	-
4	S235J2G4	-	-	-	-	-	-	-
5	S275JR	Fe 430 B	St 44-2	E 28-2	43 B	AE 275 B	Q 255 A	A 36/A 283 D
6	S275JO	Fe 430 C	St 44-3U	E 28-3	43 C	AE 275 C		-
7	S275J2G3	Fe 430 D	St 44-3N	E 28-4	43 D	AE275 D	Q 275	A 633 GR.A
8	S275J2G4	-	-	-	-	-	-	-
9	S355JR	Fe 510 B	-	E 36-2	50 B	AE 355 B	-	A 572 GR.50 / A 678 GR.A
10	S355JO	Fe 510 C	St 52 -3U	E 36-3	50 C	AE 355 C	-	-
11	S355J2G3	Fe 510 D	St 52 -3N	-	50 D	AE 355 D	-	-
12	S355J2G4	-	-	-	-	-	-	-
13	S355K2G3	Fe 510 DD	-	E 36-4	50 DD	-	-	-
14	S355K2G4	-	-	-	-	-	-	-

INTERNATIONAL STANDARDS SPECIFICATIONS :

Hot Rolled Steel Plate:

JIS G3101 SS330 / SS400 / SS490 / SS540

JIS G3106 SM400A / SM400B / SM400C / SM490A / SM490C / SM490YA / SM490YB / SM520B / SM520 / SM570

JIS G3113 SAPH310 / SAPH400 / SAPH440

JIS G3134 SPFH490 / SPFH540 / SPFH590

ASTM A36 / A709 GR-36.50.50W / A242 / A283 GR-A~D / A285~C / A515 GR-60.65070 / A516 GR-55.60
65.70 / A537 CLASS-1 / A572 GR-42

Hot Rolled Steel:

JIS G3101 SS330 / SS400 / SS490 / SS540

JIS G3106 SM400A / SM400B / SM400C / SM490A / SM490C / SM490YA / SM490YB

JIS G3113 SAPH310 / SAPH370 / SAPH400 / SAPH440

JIS G3134 SPFH490 / SPFH540 / SPFH 590

JIS G3114 SMA400A

JIS G3116 SG255 / SG295

JIS G3125 SPA-H

JIS G3131 SPHC / SPHD / SPHE

JIS G3132 SPHT1 / SPHT2 / SPHT3 / SPHT4

JIS G3303 SPB

JIS G3444 STK540

JIS G4051 S35C ~ S41C / S42C ~ S54C / S55C ~ S65C / S70C ~ S84C

JIS G4053 SCM415 / SCM420 / SCM435 / SC440

JIS G4401 SK85

ATSM A36 / A214 / A283 / A569 / A570 / A1011 CLASS 1 & 2 / A1018 A131 GRA

JFS JSH 271C (SP221) / 270D / 590 R

SAE / AISI SAE 1006 / SAE 1008~1065 / SAE1070~1084 / SAE 4130 SAE J1392 050 & 060 XLF / SAE EMPS -001 1010AK SAE 1508
~1580

CSC SCR-TEN A / AF / SCR-TEN2 / 50BV30 / HM-690T

Hot-dip Zinc-Coated Steel:

JIS G3302 SGHC SGCC SGCD1 SGCD2 SGCD3 EDDQ SGC340 (35) SGC400(50) SGC490(55)

JFS A3011 JAC270C JAC270D JAC270E JAC270F JAC340P JAC370P JAC390P JAC440P JAC340H JAC340W JAC340W JAC390W JAC440W JAC440R

ASTM A653 CS TYPE ABCFS TYPE A B DD S EDDS SS230(33) SS255(37) SS275(40) SS340(50) CLASS 1&2 SS340(50) CLASS 3

Cold Rolled Steel:

JIS G3141 SPCC SPCD SPCE SPCEN SL250Y SL370Y SL420Y

JIS G3135 SPFC340 SPFC370 SPFC390 SPFC440 SPFC490 SPFC540 SPFC590

JIS G3311 S35CM S45CM S50CM

ASTM A684 1065, SK85M

JIS G3133 SPP

CSC CF340R CF370R CF390R CF440R CF490R CF490R CF590R HS840

SAE SAE1012 SAE1017 SAE4130 SAE4135 SCM415 SCM435 SCM440

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN10204 3.1 Mill Test Certificate, NACE MR-0175 / ISO 15156, European Pressure Equipment Directive PED-97/23/EC, AD-2000-WO, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, API 6A, with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), SGS, TUV, ABS, RINA, IRS, NORSOK Approved

If you have any requirement of above items, please feel free to contact us

Regards,

CONTACT PERSON :

MUKESH SHAH
Director
Mobile No. 0091 - 9820292499
Email - marketing@rolexmetals.com

ROLEX METAL DISTRIBUTORS
( A METAL & STEEL Company )
57-A, KHATARGALLI,
THAKURDWAR,
MUMBAI - 400002, INDIA.
TEL.No. 0091-22-23858802
TEL.No. 0091-22-23823963
FAX No. 0091-22-23898724
Email - marketing@rolexmetals.com
Website – www.rolexmetals.com